HART Ethernet Gateway

article number four channel version19300-0601
connectors4 screw type terminals
transmission rate1200 Bit/s
galvanic isolation
IP codeIP20
coolingnatural convection, fanless
power consumption1,4 W
enclosurePolyamide
weight140 g
operating temperature range-40 °C … 70 °C / -40 °F … 158 °F
storage temperature range-40 °C … 85 °C / -40 °F … 185 °F
RoHs2-conformyes
approvalsUL (E465797)
driver softwareWindows XP, Vista, 7, 8, 10
delivery contentHardware, Driver, HART Starter pack, documentation German and English on USB stick
available softwareisNet H@rt DTM, is H@rt Device DTM, isHRT CommDTM (FDT 1.2.1)

article number eight channel version19300-0701
connectors8 screw type terminals
transmission rate1200 Bit/s
galvanic isolation
IP codeIP20
coolingnatural convection, fanless
power consumption1,4 W
enclosurePolyamide
weight250 g
operating temperature range-40 °C … 70 °C / -40 °F … 158 °F
storage temperature range-40 °C … 85 °C / -40 °F … 185 °F
RoHs2-conformyes
approvalsUL (E465797)
driver softwareWindows XP, Vista, 7, 8, 10
delivery contentHardware, Driver, HART Starter pack, documentation German and English on USB stick
available softwareisNet H@rt DTM, is H@rt Device DTM, isHRT CommDTM (FDT 1.2.1)

Contact

Request an offer
Support request

Downloads

The isNet H@rt Module extends the main module isNet Lite to work as an HART-Ethernet gateway. The HART Ethernet gateway is an up-to-date option to replace the widely used RS485 HART multiplexer solutions as it enables the direct connection to the existing data network of a plant. Since every HART channel possesses its own HART modem, the isNet H@rt module can handle all channels in parallel and take advantage of the high bandwidth of TCP.

The isNet H@rt modules are equipped with either four (single width) or eight (double width) channels. Up to five HART modules can be connected to the main module, so a maximum of 40 HART channels can be operated in parallel. Every channel provides galvanic decoupling from the HART line. Access to the HART network is achieved by 8 plug-in screw-type terminals.

With the isNet H@rt CommDTM, the modules can be integrated into your FDT framework. Due to the support of the HART over IP protocol, the isNet H@rt can also be used with the HCF OPC server.

Channel assignment