DEVICE INTEGRATION
FDT Applications
About PROFIBUS PROFIBUS (Process Field Bus) was originally a standard developed by Siemens for fieldbus communication in automation technology. In 1987, a consortium of over 20 institutions and companies was formed to establish a unified standard for a bit-serial fieldbus. The standardization of the field device interface would later lay the [...]
About HART In the 1980s, Rosemount developed the first HART (Highway Addressable Remote Transducer). In 1989, the HART standard was introduced by the HART Communication Foundation (HCF), and it has been part of the IEC 61158 fieldbus standard since 2007. The HART fieldbus is a fieldbus standard that is now primarily [...]
About CAN The CAN bus (Controller Area Network) is an asynchronous, serial fieldbus system. In 1983, Bosch developed the CAN bus for networking control units in automobiles. The goal of this development was to reduce cable lengths and weight. In 1987, the first version of a functional CAN bus was unveiled [...]
About DeviceNet The DeviceNet fieldbus is based on the CAN (Controller Area Network) protocol. Designed as a cost-effective yet powerful bus system for the lowest fieldbus level, it enables the networking of sensors, actuators, and associated controllers. Its primary application is factory automation. About DeviceNet DeviceNet was originally developed by Allen-Bradley, [...]
About FOUNDATION Fieldbus FOUNDATION Fieldbus is a digital, bidirectional fieldbus designed to meet the requirements of process automation. This fieldbus is developed and maintained by the Fieldbus Foundation. As a member of the Fieldbus Foundation, Thorsis Technologies GmbH develops solutions that integrate into your existing network. FOUNDATION Fieldbus H1 enables access [...]
About PROFINET PROFINET (Process Field Network) is an Industrial Ethernet standard based on TCP/IP. PROFINET extends PROFIBUS technology with Ethernet functionality. PROFINET is divided into PROFINET CBA and PROFINET IO. PROFINET CBA (Component-Based Automation) was developed for component-based communication via TCP/IP and real-time communication in modular plant engineering. A PROFINET CBA [...]
HART-Master Gateway The isH4Cube is an Ethernet gateway for the connection of HART instruments to an Ethernet network. The gateway translates from wired HART into a number of different industrial Ethernet protocols like HART-IP, Modbus-TCP or Profinet. The gateway provides 4 HART connections, each one equipped [...]
HART-IP Gateway The HART-IP gateway isHMuxGate is an ideal solution for retrofitting HART networks with Ethernet. It makes this possible without the need to replace existing RS485 HART multiplexers commonly used in HART networks. This guarantees minimal wiring effort and saves existing investments. Through the seamless [...]
Medical foot pressure measurement system for gait and load analysis Connection schema Description PlantaPress is a tool designed for recording static and dynamic pressure distributions in the context of medical applications (e.g. in orthopedics, diabetology, pressure ulcer prevention, sports medicine, and other fields). The [...]
ThorTraffic enables data exchange via ITS-G5 with passing vehicles ThorTraffic enables data exchange via ITS-G5 with passing vehicles through resource-efficient reuse and sustainable upgrade of existing traffic infrastructure of street lights in cities. ThorTraffic Station The ThorTraffic Station from Thorsis is [...]
-
About PROFIBUS PROFIBUS (Process Field Bus) was originally a standard developed by Siemens for fieldbus communication in automation technology. In 1987, a consortium of over 20 institutions and companies was formed to establish a unified standard for a bit-serial fieldbus. The standardization of the field device interface would later lay the [...]
-
About HART In the 1980s, Rosemount developed the first HART (Highway Addressable Remote Transducer). In 1989, the HART standard was introduced by the HART Communication Foundation (HCF), and it has been part of the IEC 61158 fieldbus standard since 2007. The HART fieldbus is a fieldbus standard that is now primarily [...]
-
About CAN The CAN bus (Controller Area Network) is an asynchronous, serial fieldbus system. In 1983, Bosch developed the CAN bus for networking control units in automobiles. The goal of this development was to reduce cable lengths and weight. In 1987, the first version of a functional CAN bus was unveiled [...]
-
About DeviceNet The DeviceNet fieldbus is based on the CAN (Controller Area Network) protocol. Designed as a cost-effective yet powerful bus system for the lowest fieldbus level, it enables the networking of sensors, actuators, and associated controllers. Its primary application is factory automation. About DeviceNet DeviceNet was originally developed by Allen-Bradley, [...]
-
About FOUNDATION Fieldbus FOUNDATION Fieldbus is a digital, bidirectional fieldbus designed to meet the requirements of process automation. This fieldbus is developed and maintained by the Fieldbus Foundation. As a member of the Fieldbus Foundation, Thorsis Technologies GmbH develops solutions that integrate into your existing network. FOUNDATION Fieldbus H1 enables access [...]
-
About PROFINET PROFINET (Process Field Network) is an Industrial Ethernet standard based on TCP/IP. PROFINET extends PROFIBUS technology with Ethernet functionality. PROFINET is divided into PROFINET CBA and PROFINET IO. PROFINET CBA (Component-Based Automation) was developed for component-based communication via TCP/IP and real-time communication in modular plant engineering. A PROFINET CBA [...]
-
HART-Master Gateway The isH4Cube is an Ethernet gateway for the connection of HART instruments to an Ethernet network. The gateway translates from wired HART into a number of different industrial Ethernet protocols like HART-IP, Modbus-TCP or Profinet. The gateway provides 4 HART connections, each one equipped [...]
-
HART-IP Gateway The HART-IP gateway isHMuxGate is an ideal solution for retrofitting HART networks with Ethernet. It makes this possible without the need to replace existing RS485 HART multiplexers commonly used in HART networks. This guarantees minimal wiring effort and saves existing investments. Through the seamless [...]
-
Medical foot pressure measurement system for gait and load analysis Connection schema Description PlantaPress is a tool designed for recording static and dynamic pressure distributions in the context of medical applications (e.g. in orthopedics, diabetology, pressure ulcer prevention, sports medicine, and other fields). The [...]
ThorTraffic enables data exchange via ITS-G5 with passing vehicles ThorTraffic enables data exchange via ITS-G5 with passing vehicles through resource-efficient reuse and sustainable upgrade of existing traffic infrastructure of street lights in cities. ThorTraffic Station The ThorTraffic Station from Thorsis is [...]
-
About PROFIBUS PROFIBUS (Process Field Bus) was originally a standard developed by Siemens for fieldbus communication in automation technology. In 1987, a consortium of over 20 institutions and companies was formed to establish a unified standard for a bit-serial fieldbus. The standardization of the field device interface would later lay the [...]
-
About HART In the 1980s, Rosemount developed the first HART (Highway Addressable Remote Transducer). In 1989, the HART standard was introduced by the HART Communication Foundation (HCF), and it has been part of the IEC 61158 fieldbus standard since 2007. The HART fieldbus is a fieldbus standard that is now primarily [...]
-
About CAN The CAN bus (Controller Area Network) is an asynchronous, serial fieldbus system. In 1983, Bosch developed the CAN bus for networking control units in automobiles. The goal of this development was to reduce cable lengths and weight. In 1987, the first version of a functional CAN bus was unveiled [...]
-
About DeviceNet The DeviceNet fieldbus is based on the CAN (Controller Area Network) protocol. Designed as a cost-effective yet powerful bus system for the lowest fieldbus level, it enables the networking of sensors, actuators, and associated controllers. Its primary application is factory automation. About DeviceNet DeviceNet was originally developed by Allen-Bradley, [...]
-
About FOUNDATION Fieldbus FOUNDATION Fieldbus is a digital, bidirectional fieldbus designed to meet the requirements of process automation. This fieldbus is developed and maintained by the Fieldbus Foundation. As a member of the Fieldbus Foundation, Thorsis Technologies GmbH develops solutions that integrate into your existing network. FOUNDATION Fieldbus H1 enables access [...]
-
About PROFINET PROFINET (Process Field Network) is an Industrial Ethernet standard based on TCP/IP. PROFINET extends PROFIBUS technology with Ethernet functionality. PROFINET is divided into PROFINET CBA and PROFINET IO. PROFINET CBA (Component-Based Automation) was developed for component-based communication via TCP/IP and real-time communication in modular plant engineering. A PROFINET CBA [...]
-
HART-Master Gateway The isH4Cube is an Ethernet gateway for the connection of HART instruments to an Ethernet network. The gateway translates from wired HART into a number of different industrial Ethernet protocols like HART-IP, Modbus-TCP or Profinet. The gateway provides 4 HART connections, each one equipped [...]
-
HART-IP Gateway The HART-IP gateway isHMuxGate is an ideal solution for retrofitting HART networks with Ethernet. It makes this possible without the need to replace existing RS485 HART multiplexers commonly used in HART networks. This guarantees minimal wiring effort and saves existing investments. Through the seamless [...]
-
Medical foot pressure measurement system for gait and load analysis Connection schema Description PlantaPress is a tool designed for recording static and dynamic pressure distributions in the context of medical applications (e.g. in orthopedics, diabetology, pressure ulcer prevention, sports medicine, and other fields). The [...]
ThorTraffic enables data exchange via ITS-G5 with passing vehicles ThorTraffic enables data exchange via ITS-G5 with passing vehicles through resource-efficient reuse and sustainable upgrade of existing traffic infrastructure of street lights in cities. ThorTraffic Station The ThorTraffic Station from Thorsis is [...]
-
About PROFIBUS PROFIBUS (Process Field Bus) was originally a standard developed by Siemens for fieldbus communication in automation technology. In 1987, a consortium of over 20 institutions and companies was formed to establish a unified standard for a bit-serial fieldbus. The standardization of the field device interface would later lay the [...]
-
About HART In the 1980s, Rosemount developed the first HART (Highway Addressable Remote Transducer). In 1989, the HART standard was introduced by the HART Communication Foundation (HCF), and it has been part of the IEC 61158 fieldbus standard since 2007. The HART fieldbus is a fieldbus standard that is now primarily [...]
-
About CAN The CAN bus (Controller Area Network) is an asynchronous, serial fieldbus system. In 1983, Bosch developed the CAN bus for networking control units in automobiles. The goal of this development was to reduce cable lengths and weight. In 1987, the first version of a functional CAN bus was unveiled [...]
-
About DeviceNet The DeviceNet fieldbus is based on the CAN (Controller Area Network) protocol. Designed as a cost-effective yet powerful bus system for the lowest fieldbus level, it enables the networking of sensors, actuators, and associated controllers. Its primary application is factory automation. About DeviceNet DeviceNet was originally developed by Allen-Bradley, [...]
-
About FOUNDATION Fieldbus FOUNDATION Fieldbus is a digital, bidirectional fieldbus designed to meet the requirements of process automation. This fieldbus is developed and maintained by the Fieldbus Foundation. As a member of the Fieldbus Foundation, Thorsis Technologies GmbH develops solutions that integrate into your existing network. FOUNDATION Fieldbus H1 enables access [...]
-
About PROFINET PROFINET (Process Field Network) is an Industrial Ethernet standard based on TCP/IP. PROFINET extends PROFIBUS technology with Ethernet functionality. PROFINET is divided into PROFINET CBA and PROFINET IO. PROFINET CBA (Component-Based Automation) was developed for component-based communication via TCP/IP and real-time communication in modular plant engineering. A PROFINET CBA [...]
-
HART-Master Gateway The isH4Cube is an Ethernet gateway for the connection of HART instruments to an Ethernet network. The gateway translates from wired HART into a number of different industrial Ethernet protocols like HART-IP, Modbus-TCP or Profinet. The gateway provides 4 HART connections, each one equipped [...]
-
HART-IP Gateway The HART-IP gateway isHMuxGate is an ideal solution for retrofitting HART networks with Ethernet. It makes this possible without the need to replace existing RS485 HART multiplexers commonly used in HART networks. This guarantees minimal wiring effort and saves existing investments. Through the seamless [...]
-
Medical foot pressure measurement system for gait and load analysis Connection schema Description PlantaPress is a tool designed for recording static and dynamic pressure distributions in the context of medical applications (e.g. in orthopedics, diabetology, pressure ulcer prevention, sports medicine, and other fields). The [...]
ThorTraffic enables data exchange via ITS-G5 with passing vehicles ThorTraffic enables data exchange via ITS-G5 with passing vehicles through resource-efficient reuse and sustainable upgrade of existing traffic infrastructure of street lights in cities. ThorTraffic Station The ThorTraffic Station from Thorsis is [...]
FDI Services
-
About PROFIBUS PROFIBUS (Process Field Bus) was originally a standard developed by Siemens for fieldbus communication in automation technology. In 1987, a consortium of over 20 institutions and companies was formed to establish a unified standard for a bit-serial fieldbus. The standardization of the field device interface would later lay the [...]
-
About HART In the 1980s, Rosemount developed the first HART (Highway Addressable Remote Transducer). In 1989, the HART standard was introduced by the HART Communication Foundation (HCF), and it has been part of the IEC 61158 fieldbus standard since 2007. The HART fieldbus is a fieldbus standard that is now primarily [...]
-
About CAN The CAN bus (Controller Area Network) is an asynchronous, serial fieldbus system. In 1983, Bosch developed the CAN bus for networking control units in automobiles. The goal of this development was to reduce cable lengths and weight. In 1987, the first version of a functional CAN bus was unveiled [...]
-
About DeviceNet The DeviceNet fieldbus is based on the CAN (Controller Area Network) protocol. Designed as a cost-effective yet powerful bus system for the lowest fieldbus level, it enables the networking of sensors, actuators, and associated controllers. Its primary application is factory automation. About DeviceNet DeviceNet was originally developed by Allen-Bradley, [...]
-
About FOUNDATION Fieldbus FOUNDATION Fieldbus is a digital, bidirectional fieldbus designed to meet the requirements of process automation. This fieldbus is developed and maintained by the Fieldbus Foundation. As a member of the Fieldbus Foundation, Thorsis Technologies GmbH develops solutions that integrate into your existing network. FOUNDATION Fieldbus H1 enables access [...]
-
About PROFINET PROFINET (Process Field Network) is an Industrial Ethernet standard based on TCP/IP. PROFINET extends PROFIBUS technology with Ethernet functionality. PROFINET is divided into PROFINET CBA and PROFINET IO. PROFINET CBA (Component-Based Automation) was developed for component-based communication via TCP/IP and real-time communication in modular plant engineering. A PROFINET CBA [...]
-
HART-Master Gateway The isH4Cube is an Ethernet gateway for the connection of HART instruments to an Ethernet network. The gateway translates from wired HART into a number of different industrial Ethernet protocols like HART-IP, Modbus-TCP or Profinet. The gateway provides 4 HART connections, each one equipped [...]
-
HART-IP Gateway The HART-IP gateway isHMuxGate is an ideal solution for retrofitting HART networks with Ethernet. It makes this possible without the need to replace existing RS485 HART multiplexers commonly used in HART networks. This guarantees minimal wiring effort and saves existing investments. Through the seamless [...]
-
Medical foot pressure measurement system for gait and load analysis Connection schema Description PlantaPress is a tool designed for recording static and dynamic pressure distributions in the context of medical applications (e.g. in orthopedics, diabetology, pressure ulcer prevention, sports medicine, and other fields). The [...]
ThorTraffic enables data exchange via ITS-G5 with passing vehicles ThorTraffic enables data exchange via ITS-G5 with passing vehicles through resource-efficient reuse and sustainable upgrade of existing traffic infrastructure of street lights in cities. ThorTraffic Station The ThorTraffic Station from Thorsis is [...]
-
About PROFIBUS PROFIBUS (Process Field Bus) was originally a standard developed by Siemens for fieldbus communication in automation technology. In 1987, a consortium of over 20 institutions and companies was formed to establish a unified standard for a bit-serial fieldbus. The standardization of the field device interface would later lay the [...]
-
About HART In the 1980s, Rosemount developed the first HART (Highway Addressable Remote Transducer). In 1989, the HART standard was introduced by the HART Communication Foundation (HCF), and it has been part of the IEC 61158 fieldbus standard since 2007. The HART fieldbus is a fieldbus standard that is now primarily [...]
-
About CAN The CAN bus (Controller Area Network) is an asynchronous, serial fieldbus system. In 1983, Bosch developed the CAN bus for networking control units in automobiles. The goal of this development was to reduce cable lengths and weight. In 1987, the first version of a functional CAN bus was unveiled [...]
-
About DeviceNet The DeviceNet fieldbus is based on the CAN (Controller Area Network) protocol. Designed as a cost-effective yet powerful bus system for the lowest fieldbus level, it enables the networking of sensors, actuators, and associated controllers. Its primary application is factory automation. About DeviceNet DeviceNet was originally developed by Allen-Bradley, [...]
-
About FOUNDATION Fieldbus FOUNDATION Fieldbus is a digital, bidirectional fieldbus designed to meet the requirements of process automation. This fieldbus is developed and maintained by the Fieldbus Foundation. As a member of the Fieldbus Foundation, Thorsis Technologies GmbH develops solutions that integrate into your existing network. FOUNDATION Fieldbus H1 enables access [...]
-
About PROFINET PROFINET (Process Field Network) is an Industrial Ethernet standard based on TCP/IP. PROFINET extends PROFIBUS technology with Ethernet functionality. PROFINET is divided into PROFINET CBA and PROFINET IO. PROFINET CBA (Component-Based Automation) was developed for component-based communication via TCP/IP and real-time communication in modular plant engineering. A PROFINET CBA [...]
-
HART-Master Gateway The isH4Cube is an Ethernet gateway for the connection of HART instruments to an Ethernet network. The gateway translates from wired HART into a number of different industrial Ethernet protocols like HART-IP, Modbus-TCP or Profinet. The gateway provides 4 HART connections, each one equipped [...]
-
HART-IP Gateway The HART-IP gateway isHMuxGate is an ideal solution for retrofitting HART networks with Ethernet. It makes this possible without the need to replace existing RS485 HART multiplexers commonly used in HART networks. This guarantees minimal wiring effort and saves existing investments. Through the seamless [...]
-
Medical foot pressure measurement system for gait and load analysis Connection schema Description PlantaPress is a tool designed for recording static and dynamic pressure distributions in the context of medical applications (e.g. in orthopedics, diabetology, pressure ulcer prevention, sports medicine, and other fields). The [...]
ThorTraffic enables data exchange via ITS-G5 with passing vehicles ThorTraffic enables data exchange via ITS-G5 with passing vehicles through resource-efficient reuse and sustainable upgrade of existing traffic infrastructure of street lights in cities. ThorTraffic Station The ThorTraffic Station from Thorsis is [...]
Development of UIP for .NET / Development of UIP for HTML5 In addition to the use of classical EDD UI system integration via FDI Device Packages also offers the user the use of programmed user interface plug-ins (UIP) as an option to map additional device functionalities and features. These include: [...]