HART-Master Gateway
| Order code | 14400-0201 |
| Module for top hat rail mounting (EN50022) | EN50022 |
| Processor | ATSAM9X60D |
| RAM | 64 MB |
| Flash | 256 MB |
| Transmission rate | Ethernet: 10 Mbit/s - 100 Mbit/s HART: 1200 Bit/s |
| Power consumption | 100mA (typ. at 24V DC) |
| Power supply | 19,2V .. 30V DC |
| Galvanic isolation | yes |
| IP code | IP20 |
| Cooling | natural convection, fanless |
| Body material | Polyamid |
| Dimensions (L x W x H) | 114,5mm x 45mm x 99mm |
| Weight | approx. 200g |
| Operating temperature | - 20° C <= Tamb <= 70° C / - 4° F <= Tamb <= 158° F |
| Storage temperature | - 40° C <= Tamb <= 85° C /- 40° F <= Tamb <= 185° F |
Contact
Request an offer
Support request
Downloads
Description
The isH4Cube is an Ethernet gateway for the connection of HART instruments to an Ethernet network. The gateway translates from wired HART into a number of different industrial Ethernet protocols like HART-IP, Modbus-TCP or Profinet. The gateway provides 4 HART connections, each one equipped with a separate HART modem. This allows to run the 4 channels independently. By processing HART requests on different channels simultaneously, system performance is increased significantly. All 4 channel are galvanically isolated and provide an optionally usable 240 Ohm loop resistor.
