HART Ethernet Gateway
| Article number four channel version | 19300-0601 |
| Connectors | 4 screw type terminals |
| Transmission rate | 1200 Bit/s |
| Galvanic isolation | yes |
| IP code | IP20 |
| Cooling | Natural convection, fanless |
| Power consumption | 1,4 W |
| Enclosure | Polyamide |
| Weight | 140 g |
| Operating temperature range | -40 °C … 70 °C / -40 °F … 158 °F |
| Storage temperature range | -40 °C … 85 °C / -40 °F … 185 °F |
| RoHs2-conform | yes |
| Approvals | UL (E465797) |
| Driver software | Windows XP, Vista, 7, 8, 10, 11 |
| Delivery content | Hardware, Driver, HART Starter pack, documentation German and English on USB stick |
| Available software | isNet H@rt DTM, is H@rt Device DTM, isHRT CommDTM (FDT 1.2.1) |
| Article number eight channel version | 19300-0701 |
| Connectors | 8 screw type terminals |
| Transmission rate | 1200 Bit/s |
| Galvanic isolation | yes |
| IP code | IP20 |
| Cooling | Natural convection, fanless |
| Power consumption | 1,4 W |
| Enclosure | Polyamide |
| Weight | 250 g |
| Operating temperature range | -40 °C … 70 °C / -40 °F … 158 °F |
| Storage temperature range | -40 °C … 85 °C / -40 °F … 185 °F |
| RoHs2-conform | yes |
| Approvals | UL (E465797) |
| Driver software | Windows XP, Vista, 7, 8, 10, 11 |
| Delivery content | Hardware, Driver, HART Starter pack, documentation German and English on USB stick |
| Available software | isNet H@rt DTM, is H@rt Device DTM, isHRT CommDTM (FDT 1.2.1) |
Contact
Downloads
Description
The isNet H@rt Module extends the isNet Lite (head end) to work as an HART-Ethernet gateway. The HART Ethernet gateway is an up-to-date option to replace the widely used RS485 HART multiplexer solutions as it enables the direct connection to the existing data network of a plant. Since every HART channel possesses its own HART modem, the isNet H@rt module can handle all channels in parallel and take advantage of the high bandwidth of TCP.
The isNet H@rt modules are equipped with either four (single width) or eight (double width) channels. Up to five HART modules can be connected to the main module, so a maximum of 40 HART channels can be operated in parallel. Every channel provides galvanic decoupling from the HART line. Access to the HART network is achieved by 8 plug-in screw-type terminals.
With the isNet H@rt CommDTM, the modules can be integrated into your FDT framework. Due to the support of the HART over IP protocol, the isNet H@rt can also be used with the HCF OPC server.
Connection Assignment
